Latest travertine sale Tenders | Government travertine sale Tenders

State Government

CTN :45482296

13 Jun, 2026 49.9 Thousand

Nadia - West Bengal

Tender For notice for the vbgram materials supply - supply of first aid box including medicines (specified by pia) at, model citizen information board for ibs( specification-made of, with a height of 3ft, width 2ft and thickness of 4 inch & 30 degree, head with pentagonal shape including fixing the mgnrega, biswa bangla logo in upper side of the board and supply in, mgnrega worksite anywhere., model citizen information board for community (specification-, of brick structure with plastering and colour ( back colour, and black for writting) with a height of 4ft, width 3ft and thickness, 4 inch & 30 degree in head with pentagonal shape including fixing, the mgnrega and biswa bangla logo in upper side of the board, supply in the mgnrega worksite anywhere., g.i. wire, coconut rope, sal ballah (10 cm ), sal ballah ( 125 mm ), sal ballah (15 cm ), cement primer(interior), cement primer(exterior), primer( for wood), cement based dust putty, black japan paint, enamel paint for steel grill, synthetic enemel paint in black or chocolate shade., other local wood, supplying, fitting & fixing factory made p.v.c. door frame of size, mmx47 mm with a wall thickness of 5 mm, made out of extruded, mm, pvc sheet miter, coloured orissa pattern w.c. pan 580x440 mm, vitreous china foot rests 250x125x25 mm, ptmt - towel rail (600 mm), fan hook, r.c.c. ventilator, vitrified floor tile 60x60 cm, turpentine oil, hydraulic door closer tuular type aluminium section body, anodiesd aluminium hanging type door stopper, vitreous china flat back wash basin 450x300 mm, r.c.c. pipes np2 class 450 mm dia, r.c.c. pipes np2 class 300 mm dia, supplying, fitting & fixing 30 mm thick both side prelaminated, factory made solid panel pvc door shutter consisting of outer, made out of m.s. tubes of 19 gauge thickness and size 19 mmx19, mm for styles, top and bottom rails, m.s. frame shall have cost, steel primers of approved make, supplying, fitting and fixing m.s. clamps for door and window frame, made of flat bent bar, end bifurcated with necessary screws etc., cement concrete(1:2:4) as per direction. (cost of concrete will be, paid separately) (a) 40mm x 6mm, 250mm length, anodised aluminium butt hinges of approved quality manufactured, from extruded section conforming to i.s. specification (i.s. 205/66), and fitted and fixed with cadmium plated screws: (vii) 100 x 75 x, 4.0mm, anodised aluminium barrel / tower / socket bolt (full covered) of, approved manufactured from extruded section conforming to i.s., 204/74 fitted and fixed with cadmium plated screws: (vi) 200mm, long x 10mm dia. bolt., anodised aliminium d-type handle of approved quality, manufactured from extruded section conforming to i.s. specification, (i.s. 230/72) fitted and fixed complete: (a) with continuous plate, base (hexagonal/ round rod) (iii) 100 mm grip x 12 mm dia rod., (c) supplying 6 levers 'godrej' crystal satine mortice lock with keys, including fitting & fixing complete., i) iron hasp bolt of approved quality fitted and fixed complete, (oxidised) with 16mm dia rod with centre bolt and round fitting. (, 200mm long, door stopper.(brass), red lead primer for steel grill, interior premium imulsion(plastic paint), exterior imulsion weather coat paint, distemper paint, supply of upvc pipes (b type) (for soil pipe purpose) & fittings, conforming to is-13592-1992 (a) (i) single socketed 3 meter length, (c) 160 mm, (ii) plain tee for soil pipe purpose. (c) 160 mm, v) plain y for soil pipe purpose. (c) 160 mm, supplying, fitting & fixing upvc down pipes a- type and fittings, conforming tois:13592-1992 with all necessary clamps nails,, including making holes inwalls, floor etc. cutting trenches in any soil, through masonry concrete, structures etc if necessary and mending good damages including, joining withjointing materails (spun yarn, valamoid/bitumen/m-seal, etc) complete. a) upvc pipes: (ii) 110 mm. dia., s, d) shoe (ii) 110 mm. dia, qgs seed(10 variety), g.i. hollow pipe squre or

State Government

CTN :45502939

19 Jun, 2026 4.65 Lacs

Perumbavoor - Kerala

Tender For work includes new toilet near verandah of high school block and ramp.estimate includes dr foundation, rr basement, solid block masonry, rcc roofing, ceramic floor and wall tiles,vitrified tile primer painting fittings rcc septictank waste pit etc

CTN :45493129

18 Jun, 2026 52.40 Lacs

Puducherry - Tamil Nadu

Tender For construction of 400 bedded boys hostel building at jipmer campus, pducherry. (civil work): building portion including internal water supply lines, sanitary installation, dramage , demolition of existing quarters & other development works. (electrical and medchanical installation): package c1: providing internal e1, c2: providing fire alarm system, c3: providing firefighting system, c4: providing cctv, c5: providing 3 nos 13 passenger lift, c6: providing 5000 lpd solar water heater, c7: providing networking, (agreement no. 32/ee(puducherry)/cpwd/2023-24) sub head : risk & cost under clause 14 for execution of vitrified tile flooring work, vitrified tile skirting work, anti skit ceramic glazed floor tile and ceramic glazed wall tile and granite work for flooring. (recall -2 tender id of pervious call 156238)subwork/packages:risk & cost under clause 14 for execution of vitrified tile flooring work, vitrified tile skirting work, anti skit ceramic glazed floor tile ceramic glazed wall tile and granite work for flooring. (recall-2 tender id of pervious call 156238)

CTN :45468027

19 Jun, 2026 NA

Jammu - Jammu And Kashmir

Tender For supply of floor trap of 75mm dia with grating , pvc swr gully trap of size 110mm dia , pvc pipe 100mm bore 20ft long , pvc swr 110 mm dia pipe with three socket , stainless steel storage racks , stainless steel serving platform , stainless steel vegetable cutting table , preparation table , deep freezer of 200 ltr capacity , grill cage , chula , dining table , dining chair , synthetic enamal paint dark brown 4ltr pack , synthetic enamal paint og 4ltr pack , thinner , painting brush 50mm , painting brush 100mm , painting brush 125 mm , cement base paint weather proof , gi plate 600mm x 600mmx 6mm thick , ci cover of size 290 x 290 x 6 mm , glpipe 40 mm dia medium grade 04 m , gi strip of size 25 x4 mm 08 m , salt , ms funnel with wire mesh 01 no , gi pipe 20mm dia med grade , gi reducer 40 x 20 mm isi marked , ms rod 6 mm dia 2 long , charcoal dust , 5 mm dia 30 mm long gi bolt with nut , air termination single pointed copper rod 12mm dia and 300mm long , gi pipe 100mm dia 2 m lomg medium grade with base plate , back fill compound , ci manhole cover of size 30cm x 30 cm with handles , aluminium strip 25 x 3 mm , gi strip 32 x 6 mm rm 03 , insulator for fixing down conductors as per relevent is 25 nos , vitrified floor coloured tiles , anti skid coloured floor tiles , perforated type gypsum board false ceiling panel , kota stone flooring 25 mm thick , mild steel chromium plated 25 mm dia and 3mm thickness drapery rod , integral water proofing compound , white or coloured cement to match the floor finishes surface , fire extingusher one kg capacity , drill bits 3 mm size , drill bits 6 mm size , drill bits 8 mm size , drill bits 10 mm size , drill machine high speed heavy duty qty , hacksaw frame with 5 bladeboth side teeth , screw driver blade length 300 mm, blade dia 6 mm qty , hammer , magnetic nut setter of size 8mm , parthal wooden planks for shuttering , circular tile cuting machine with 5 blade , panel steel cuting dimond blade , aluminium planer for mason , brick trowel , brick hammer , insulated plair side cutting 250 mm , measuring tape 30 mtr long , water level pipe l equal to 20 mtr qty , bonding adhesive , mild steel material handling trolley

State Government

CTN :45430192

19 Jun, 2026 26.03 Lacs

Shimla - Himachal Pradesh

Tender For addition and alteration of attic floor of uit department to accommodate faculty members by providing aluminum partitions, ceiling vitrified tiles flooring wall paneling cupboards polishing including painting and white washing in hp university, shimla - addition and alteration of attic floor of uit department to accommodate faculty members by providing aluminum partitions, ceiling, vitrified tile flooring, wall panelling, cupboards, polishing including painting and white washing in hp university, shimla-5.

CTN :45442671

19 Jun, 2026 10.00 Lacs

Palakkad - Kerala

Tender For material supply for works in mgnregs action plan - material supply for mgnregs individual and common asset creation - stone aggregate:40mm nominal size, stone aggregate:20mm nominal size, stone aggregate:10mm nominal size, stone aggregate:06mm nominal size, course sand(zone3), portland cement, concrete mixer, vibrator, stone for masonry work, twisted steel/deformed bars, structural steel such as tees,angles,channels and r.s joists, second class kail wood in planks, second class kail wood in scantling, wall form panel 1250*450mm, corner angle 45*45*5mm 2.5long, column clamp 450*1070mm, prop 2m(2-3.5m), laterate stone of size 40*20*15cm, solid block of size 30*20*15cm, mild steel plates, mild steel rivets, flats up to 10mm in thickness, 20 mm dia.holding down bolts, mild steel sheets for tanks, galvanised wire mesh, iron pintels including welded pin, mild steel sheets with bolts and nuts, mild steel hooks, gi trafford profile sheet 0.35mm thick, galvanised steel jor l hooks 8 mm dia, galvanised steel bolts and nuts 6mm dia and 25mm long round head with slots, wire nails, fine sand, pvc pipe 63 mm outer dia., pvc bend 63 mm dia., pvc pipe 110mm outer dia., pvc elbow 63 mm dia, pvc tee 63*63*63 mm dia, pvc end cap 63 mm dia, pvc reducer 63*50mm dia, pvc pipe 160mm outer dia., gi pipes 50 mm dia., gi pipes 40 mm dia, quarry waste, precoated galvanised plain ridge, vitrified floor tile 60*60cm, welding by electric plant, hire charge of 10hp engine and pump set, diesel oil, 200 mm aluminium aldop, pvc socket/coupling 63 mm dia, polythene water storage tank, red oxide zinc chromate primer, deharadun white lime, smooth wheeled roller 8 to 10 tonne, water tanker 5 to 6 kl capacity, interlocking c.c. paver block (80 mm thick, m-30), sundries

State Government

CTN :45447017

11 Jun, 2026 NA

Nadia - West Bengal

Tender For supply of item rate e-quotations for various types of mgnrega materials as per annexure-i under tehatta-ii development block - item rate, 1 st picked class brick, 1 st class brick, 1st class brick bats ( size as direction of eic)., silver sand, fine sand, medium sand, course sand, portland cement, brick aggregrates (single size) 40 mm normal size., stone aggregrates (single size) 40 mm normal size. (without carriage), stone aggregrates (single size) 20 mm normal size.(without carriage), stone aggregrates (single size) 10 mm normal size.(without carriage), stone aggregrates (single size) 5.6 mm normal size.(without carriage), stone aggregrates 13.2 mm nominal size. (without carriage), stone aggregrates 11.2 mm nominal size. (without carriage), 22.4 mm machine made chips (without carriage)., jhama metal kiln burnt. ( size as direction of eic)., thermocol 12.5 mm thick., polythene sheet (150 gm per sqm), hire charges of concrete mixer 0.25 to 0.40 cum with hopper, hire charges of diesel road roller- 8 to 10 tonne, hire charge of shuttering plank(without prop )(25mm-30 mm), hire charge of shuttering plank(with prop )(25mm-30 mm), hire charge of shuttering plank( with prop (30mm 37 mm ), vibrator (needle type 40 mm), steel material- tor steel rods/hysd bars/tmt bars(sail/tata/rinl) (fe415/fe500/fe500d,conforms to is 1786), steel material- tor steel rods/hysd bars/tmt bars(jsw/jspl/shyam/srmb/ssl/bmasl/electro steel)(fe415/fe500/fe500d,conforms to is 1786), ms ornamental grill (above 10 kg/sq.m up to 16 kg/sq.m, nail, 1220. wire mesh (rabbit), glue, 3050. galvanised steel corrugated sheets, 1023. galvanised steel j or l hooks 8 mm dia, galvanised steel bolt & nuts 6 mm dia and 25 mm long round head with slots, g.i lime washere, bitumen washer, stainless steel bolts/ square bar and plates, unslaked lime, supply of first aid box including medicines (specified by pia) at site., display board(ibs), display board(ibs), g.i. wire, coconut rope, sal ballah (10 cm ), sal ballah ( 125 mm ), sal ballah (15 cm ), cement primer(interior), cement primer(exterior), primer( for wood), cement based dust putty, black japan paint, enamel paint for steel grill, synthetic enemel paint in black or chocolate shade., woodwork for door and window frame malayashia sal, panel shutters of door and window, as per design (each panel consisting of single plank without joint), including fitting and fixing the same in position butexcluding the cost of hinge and other fittings.(ii) 40mm thick shutters with 19mm thick panel of size 30 to 45 cm.(b) sishu, gamar, champ,badam,bhola, mogra, hallak., supplying, fitting & fixing factory made p.v.c. door frame of size 50 mmx47 mm with a wall thickness of 5 mm, made out of extruded 5 mm, pvc sheet miter, coloured orissa pattern w.c. pan 580x440 mm, vitreous china pedestal for wash basin, vitreous china foot rests 250x125x25 mm, ptmt - liquid soap container of 400 ml capacity, ptmt - towel rail (600 mm), ptmt - soap dish/holder 138x102x75 mm, fan hook, r.c.c. ventilator, vitrified floor tile 60x60 cm, turpentine oil, vitreous china flat back wash basin 450x300 mm, r.c.c. pipes np2 class 450 mm dia, r.c.c. pipes np2 class 300 mm dia, supplying, fitting & fixing 30 mm thick both side prelaminated factory made solid panel pvc door shutter consisting of outer frame made out of m.s. tubes of 19 gauge thickness and size 19 mmx19 mm for styles, top and bottom rails, m.s. frame shall have cost of steel primers of approved make, supplying, fitting and fixing m.s. clamps for door and window frame made of flat bent bar, end bifurcated with necessary screws etc. by cement concrete(1:2:4) as per direction. (cost of concrete will be paid separately) (a) 40mm x 6mm, 250mm length, anodised aluminium butt hinges of approved quality manufactured from extruded section conforming to i.s. specification (i.s. 205/66) and fitted and fixed with cadmium plated screws: (vii) 100 x 75 x 4.0mm, anodised aluminium barrel / tower / socket bol

State Government

CTN :45455116

20 Jun, 2026 31.47 Lacs

Delhi - Delhi

Tender For tender for supply of repair and renovation of lecture theratre in academic block - polishing in high gloss finish melamine clean polish on wood work , painting with synthetic enamel paint of approved brand , melamine polishining wood work , providing and fixing plain lining with necessary screws , dismantling tile work in floors and roofs laid in cement mortar inclduing stacking material , providing and fixing plywood 6mm thick one side decorative veneer , providing and laying vitrified floor tiles in different sizes with water , dismantling wooden boarding in lining of walls and partitions , refurbishing the top surfaces of an existing wooden dust , providing & fixing hdf laminate wooden flooring of action tesa vista in 12mm

State Government

CTN :45415881

18 Jun, 2026 NA

Balaghat - Madhya Pradesh

Tender For hardware and sanitory materials for construction and maintenace work - hardware and sanitory material, upvc water tank 200 liters, upvc water tank 300 liters, upvc water tank 500 liters, upvc water tank 750 liters, upvc water tank 1000 liters, pvc pipe (per feet), pvc pipe 3/4 (per feet), pvc pipe 1 (per feet), pvc pipe 1 (per feet), pvc pipe 2 (per feet), pvc pipe 3 (per feet), pvc pipe 4 (per feet), pvc pipe 5 (per feet), upvc pipe (per feet), upvc pipe 3/4 (per feet), upvc pipe 1 (per feet), upvc pipe 1 (per feet), upvc pipe 2 (per feet), cpvc pipe (per feet), cpvc pipe 3/4 (per feet), cpvc pipe 1 (per feet), cpvc pipe 1 (per feet), cpvc pipe 2 (per feet), cpvc pipe 3 (per feet), cpvc pipe 4 (per feet), cpvc pipe 5 (per feet), cpvc elbow 20mm / " (per no.), cpvc elbow 25mm / 1" (per no.), cpvc elbow 40mm / 1 " (per no.), cpvc tee 20mm / " (per no.), cpvc tee 25mm / 1" (per no.), cpvc tee 40mm / 1 " (per no.), cpvc coupler 20mm / " (per no.), cpvc coupler 25mm / 1" (per no.), cpvc coupler 40mm / 1 " (per no.), cpvc reducing brass f.t. 20x15 (per no.), cpvc reducing brass m.t. 20x15 (per no.), cpvc brass f.t. 25mm, 1" (per no.), cpvc brass f.t. 40mm, 1 " (per no.), cpvc brass m.t. 25mm, 1" (per no.), cpvc brass m.t. 40mm, 1 " (per no.), cpvc elbow brass 20x15 (per no.), cpvc elbow brass 25x25 (per no.), cpvc tank connector 25mm (per no.), cpvc tank connector 40mm (per no.), cpvc union 25mm / 1" (per no.), cpvc union 40mm / 1 " (per no.), cpvc ball valve 25mm / 1" (per no.), cpvc ball valve 40mm / 1 " (per no.), cpvc reducer 25x20mm / 1"x " (per no.), cpvc reducer 40x25mm / 1 "x1" (per no.), cpvc reducer tee 25x20mm / 1"x " (per no.), cpvc reducer tee 40x25mm / 1 "x1" (per no.), cpvc reducer tee 40x20mm / 1 "x " (per no.), cpvc end cap 20mm / " (per no.), cpvc end cap 25mm / 1" (per no.), cpvc end cap 40mm / 1 " (per no.), cpvc step over bend 25mm (per no.), cpvc bushing 25x20mm / 1"x " (per no.), cpvc bushing 40x25mm / 1 "x1" (per no.), cpvc shoe elbow 25mm / 1" (per no.), cpvc shoe elbow 40mm / 1 " (per no.), hdp pipe 1" (per feet), hdp pipe 1 " (per feet), toilet seat indian with flush tank (all kits) (per no.), toilet seat western with flush tank (all kits) (per no.), toilet seat wall mounted with flush tank (all kits) (per no.), urinal seat (per no.), gate wall 1 inch (per no.), union 1 inch (per no.), water tank connector 1 inch (per no.), tank nipple 0.75 inch (per no.), plastic pipe 1 inch (per no.), elbow 1 inch (per no.), tee 1 inch (per no.), socket 1 inch (per no.), tee 1 x 3/4 inch (per no.), bush 1 x 0.75 inch (per no.), hose nippal 1 inch (per no.), brass elbo 1 x1 inch (per no.), water tap/toty full brass 3/4 (per no.), brass elbo 0.5 inch (per no.), brass socket 0.5 inch (per no.), angle cock (per no.), basin coupling (per no.), waste pipe (per feet), connector pipe (per no.), teflon tape (per no.), flanch (per no.), wash basin (per no.), pedestal wash basin/sink (per no.), kitchen sink 18x24 (per no.), concealed shower (per no.), sanitary pipe 3 inch (per feet), sanitary pipe 4 inch (per feet), tee 3 inch (per no.), elbow 3 inch (per no.), shower tape 3 x 4 (per no.), elbow 4 inch (per no.), tee 4 inch (per no.), bib cock (per no.), solvent 250 grams (per no.), m-seal (per no.), garden pipe " (per kg), garden pipe 1" (per kg), vitrified tiles glossy double charge izfr oxz qqv size 1 x 1, vitrified tiles glossy double charge izfr oxz qqv size 1.5 x 1.5, vitrified tiles glossy double charge izfr oxz qqv size 2 x 4, tiles matt finish for floor 1 x 1 (per sq feet), tiles matt finish for floor 1 x 1 (per sq feet), tiles matt finish for floor 2 x 2 (per sq feet), astral vetra lv-401 (per no.), araldite (per kg), tile adhesives type 1 bag (20 kg), tile adhesives type 2 bag (20 kg), tile adhesives type 3 bag (20 kg), profile sheet-steel 3.5x8 feet (thickness 0.50mm), profile sheet-steel 3.5x10 feet (thickness 0.50mm), profile sheet-steel 3.5x12 feet (thickness 0.50mm), profile sheet-steel 3.5x14 feet (thickness 0.50m

State Government

CTN :45415906

10 Jun, 2026 NA

Birbhum - West Bengal

Tender For local market rate for construction items materials of labpur dev. block jurisdiction of fy-2026-27 (including all taxes). - laying and jointing pvc pipe. heading, welding by electric plant, hire charges for 5 hp with operator,fuel and shifting etc all charges complete, hire charges of shuttering plank (25mm-30mm thick) with prop including all fittings, hire charges of shuttering plank (25mm-30mm thick) without prop including all fittings, hire charges of shuttering plank (above 30mm-37mm thick) with prop including all fittings, hire charges of 5 kva generator, hire charges of 3 kva generator, hire charges of concrete mixer 0.25 to 0.40 cum with hopper, hire charges of diesel road roller- 8 to 10 tonne, vibrator (needle type 40 mm), surface vibrator, water tanker 5000 ltr. capacity, 1st class picked jhama bricks(traditional), 1st class traditional bricks (kiln burnt), modular fly ash bricks, fly ash bricks(traditional), coloured inter locking c.c. paver block, moorum, fine sand, medium sand, coarse sand, coarse sand, portland cement, white cement, water proofing materials, brick aggregate (single size):50 mm nominal size, brick aggregate (single size):40 mm nominal size, stone aggregate(single size):63 mm nominal size, stone aggregate(single size): 40 mm nominal size, stone aggregate(single size):20 mm nominal size, stone aggregate(single size): 10 mm nominal size, stone aggregate(single size): 06 mm nominal size, stone screening type a (13.2 mm), stone screening type b (11.2mm), stone boulder( 225 mm above ), stone boulder ( 225mm-150mm ), grade 1 stone metal 63 mm to 45 mm, polythene sheet (150 gm per sqm), thermocol 12.5 mm thick., udaypur marble slab ( for floor, lobby etc) 18 mm thick of size 0.3 sq m to 0.6 sq m, chawk dungri marble slab ( for floor, lobby etc) 18 mm thick of size 0.3 sq m to 0.6 sq m, udaypur marble slab ( for wall/dado) 18 mm thick of size 0.3 sq m to 0.6 sq m, chawk dungri marble slab ( for wall/dado) 18 mm thick of size 0.3 sq m to 0.6 sq m, 18 mm thick marble partition slab for urinals including fitting fixing (with chawk doongri marble), ceramic glazed tiles ist quality 300 x 300 mm in all shades and designs of white, ivory, grey, fume red brown etc., rectified - ceramic glazed tiles ist quality 300 x 300 mm or more in all shades designs white, ivory, grey, fume red brown etc, vitrified floor tile 60x60 cm, precast chequered cement tiles 22 mm thick dark shade using ordinary cement, bitumen vg-30, bitumen emulsion, coal tar, diesel oil, sal silliguri -in/c labour cost, sal malaysia-in/c labour cost, neem wood -in/c labour cost, other local wood -in/c labour cost, ordinary teak wood -in/c labour cost, sisu/gamar wood -in/c labour cost, local sal wood -in/c labour cost, bamboo (8cm-10cm dia) including fixing, eucalyptus bullah (7.5cm -10cm dia), eucalyptus bullah (12.5cm -15cm dia), eucalyptus bullah (17.5cm -20cm dia), sal bullah (7.5cm -10cm dia), sal bullah (12.5cm -15cm dia), sal bullah (17.5cm -20cm dia), malayasia sal cleat, wood dust, frp composite door frame 66mm x 70mm, frp composite door frame 66mm x 90mm, supplying solid flush type doors of commercial quality, 30 mm thick factory made glass fiber reinforced plastic panel door shutter i/c carriage, supplying,fitting & fixing of 2-track / 3-track aluminium sliding window, supplying, fitting & fixing of partly glazed partly paneled or fully glazed single leaf aluminium swing door, supplying, fitting & fixing of aluminium fixed partition wall of all aluminium sections, anodised aluminium hanging type door stopper, brass 150 mm floor door stopper (0.357 kg), chromium plated brass mortice latch and lock 100x65 mm with 6 levers and a pair of brass lever handles, ms integrated grill for steel window and ventillator, two point nose steel handle, openable steel windows as per is sizes with side hung shutters and horizotal glazing bars., top hung side hung ventillator, fixed type ventilators as per i.s. sizes with horizontal glazing bars h

Travertine Sale Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

State Government

State Government

State Government

State Government

State Government

State Government

State Government